Overview

Heavy Duty Apron Feeder is auxiliary equipment for mining and transportation usually used in large scale beneficiation plant, cement plant, construction and so on. Zenith BWZ Series Heavy Duty Apron Feeder is developed on the basis of the feedback of the customer and experience of the experts.

This feeder can evenly and continuously feed the raw materials into primary crusher, especially suitable for short-distance transportation and complex environment. Zenith BWZ Series Heavy Duty Apron Feeder can also be used to transfer large and heavy particles.

Common Used Apron Feeder In Mining Field

Generally, there are three types of apron feeder, heavy duty apron feeder, medium duty apron feeder and light duty apron feeder, among which the common used ones in beneficiation plant are heavy duty apron feeder and medium duty apron feeder. The heavy duty apron feeder can bear the impact of dozens of tons of rock pulling down from the truck. The max feeding size can reach over 1000 mm. The max feeding size of medium duty apron feeder is no more than 350mm and the temperature of the raw materials should below 400¡æ.

Features Of Heavy Duty Apron Feeder

Apron feeder has now become one of the necessary equipment in mineral processing and continuously producing. Zenith BWZ Series Heavy Duty Apron Feeder has the following characteristics:

1. Using two-point support structure, installing one side on the crusher directly which saves the investment capital;
2. The special design of the back makes this feeder suitable for rainy and damp areas avoids the slippage phenomenon caused by the gathering of the wet materials;
3. The traction chain and the load chain are separate, and the dynamic load is very small, which increase the life expectancy;
4. High tension and stable performance;
5. Easy to operate and maintain.

Notes While Installation

• The feeder can be installed horizontally or gradient. To avoid the raw materials impact the feeder directly, the silo should not be empty;
• The feeder should be installed on the horizontal concrete foundation and be fixed by anchor bolt;
• While installing, the operator should keep the main body perpendicular to the horizon;
• After installation, the operator should check if the bolts are tight;
• After checking, if the vacant load trial running is normal, the customer can proceed the production.

Technical data

BWZ Series Heavy Duty Apron Feeder

MODEL	Width（mm)	Wheel Base（mm）	Max. Feed Size（mm）	Capacity（t/h）	Power（kW）
BWZ1250×6	1250	6000	650	150	15
BWZ1400×8	1400	8000	750	250	18.5
BWZ1600×9	1600	9000	900	350	30
BWZ1800×9	1800	9000	1050	500	37
BWZ2000×10	2000	10000	1100	680	45
BWZ2200×10	2200	10000	1250	800	55
BWZ2400×12	2400	12000	1600	1000	2×55

MODEL	Width（mm)	Wheel Base（mm）	Max. Feed Size（mm）	Capacity（t/h）	Power（kW）
BWH800×5	800	5000	400	100	7.5
BWH1000×6	1000	6000	450	130	7.5
BWH1200×6	1200	6000	500	180	15
BWH1400×8	1400	8000	550	280	22
BWH1600×8	1600	8000	600	400	30
BWH1800×8	1800	8000	700	600	37